SXL II
Trust but verify.
SXL II – that’s our paradigm for power management, amplifier control and monitoring within venues of any size. It accomodates all possibilities and requirements in the most versatile way. Whether embedded in a network or stand-alone, via the internet or by the simple push of a button.
But the SXL II is much more.
It provides effortless communication with the digital signal processing inside the intelligent XR power amps. Up to 15 complex scenarios may be switched by the single push of a button – whatever the situation requires. All that while all activities will be logged and sent as an e-mail – for a seamless control, no matter where you are.
Feel safe through information!
Ethernet is the medium of choice : fast, safe, affordable and available worldwide. The integrated webserver will guarantee a fast and easy communication with the user.
Freely configurable? This goes without asking.
SXL II – The amplifier gateway into your LAN
- Network Management
- Integration into Ethernet LAN
- Communication with amplifiers via RS485 or I2C
- Independant backup modes
- Computer free operation
- Local configuration WITHOUT computer
- SD Card for storage of configurations
- Logging of all events
- Forwards log-events via email and SNMP syslog
- Integrated webserver
- Fast dynamic user configurable webinterface with integrated help system
- Simple integration into object orientated, graphic programming languages
- 16 non-volatile memories
- Automatic detection of connected amplifiers
- Monitoring of voltage and current
- 8 non-polarity logical inputs
- 10 relay outputs
- Alive contact
- Display of active configuration, alive and status LED
- 3 Years Warranty
Technical Data
SXL II | |
Monitoring per Amplifier | AC Status
Automatic Detection of Operation Mode Automatic Detection of connected Amps |
Controls per Amplifier | Remote Power On/Standby
Power On Delay 0 to 10 sec |
Monitoring per Channel | Output Clip
Protect Status Input Level Temperature Output Voltage Output Current Output Power Headroom Load (Short/open) |
Controls per Channel | Input Polarity
Mute On/Off Gain + 6 dB to 90 dB (0.5 dB) Paging On/Off Monitor Output On/Off Monitor Level +6 dB to -90 dB (0.5 dB) |
Special Functions | Signal Generator with dedicated audio output
SD Card Slot (Storage for configurations) 16 SXL and 50 DSP Presets in a Non-Volatile Memory Presets may be Recalled via Logic Inputs Versatile Errormatrix with 8 dedicated relays |
Communication | Ethernet 100Base-T (100 Mbit / RJ45)
TCP/IP based Protocol Dataport 15 pin Sub-D female RS485 (In/Out RJ45) |
Inputs | 8 Logical Inputs 5-24 Volts (High)
All Connectors Euro-Phoenix |
Outputs | Signal Generator (electr. balanced)
10 Relay (DPST), 1 A / 30 VDC each 12 Volt supply for logical inputs Alive Contact All Connectors Euro-Phoenix |
Displays | LCD for all functions
Display of current configuration LEDs: Link per Amplifier and AX16 Ethernet, I2C, RS485 Status, User LED, Alive, Power |
General | Weight: 4 kg (9 lbs)
Dimensions: 1 RU / 19" 483 x 335 x 44 mm |